background image

Operating Instructions

40

OPERATING INSTRUCTIONS

Safety

The safety aspects of this appliance comply with the accepted technical 
standards and the German Appliance Safety Law. However, we also 
consider it our obligation as a manufacturer to make you aware of the 
following safety information.

Electrical Safety

• The new appliance may only be installed and connected up by quali-

fied personnel, according to the manufacturers instructions and to 
the relevant country standards.
Please observe this instruction, otherwise the warranty will not cover 
any damage that may occur.

• Repairs to the appliance should only be carried out by approved ser-

vice engineers. Improper repairs can cause injury or significant mal-
function. If your appliance needs repairing, please contact your local 
AEG Service Force Centre.

• If your appliance malfunctions or fractures and cracks or splits 

appear:
– switch off all cooking zones,
– Disconnect the hob from the electricity supply.

Child Safety

The cooking zones will become hot when the hob is in use. Therefore, 
always keep small children away.
The hob is designed to be operated by adults. Do not allow children to 
play near or with the hob

Safety During Use

• This appliance is intended for domestic cooking only. It is not desi-

gned for commercial or industrial purposes

• Do not use the hob to heat the room.

• Take care when plugging electrical appliances into mains sockets near 

the hob. Connecting leads must not come into contact with the hot 
surface.

• Overheated fats and oils catch fire quickly. You should supervise coo-

king when preparing foods in fat or oil (e.g. chips).

• Switch the cooking zones off after use.

Summary of Contents for 61100 M





















Reviews: