22
Switching off the safety cut-out function before it
has come to an end
There are two ways to switch off the safety cut-out function before it
has come to an end.
Switch off the cooking zone and timer simultaneously
1.
Using the
heat setting selector sensor panel, reset the desired cook-
ing zone to zero:
the cooking zone and timer
will switch themselves
off.
Switch off the timer – the cooking zone remains active
1.
Select the desired cooking zone using the timer sensor panel. The corre-
sponding control lamp will then flash more rapidly.
2.
Using the
-
timer setting sensor panel, set the timer to
00
:
–
only the
timer
will switch itself off.
–
the cooking zone will remain in operation.
Countdown timer
To be able to use the countdown timer the appliance must be switched
on, but all the cooking zones must be switched off.
1.
Touch the timer sensor panel.
00
will be shown in the timer display.
2.
Set the desired period of time using the
+
or
-
timer setting sensor
panels.
The countdown timer function will be activated after several minutes
and the remaining time will be displayed.
To reset the remaining time, touch the timer sensor panel and change
the setting using the
+
or
-
sensor panels for setting the timer.
After the set period of time has elapsed an acoustic signal sounds and
the timer display flashes
00
.
3.
To switch off the signal, touch the timer sensor panel.
Summary of Contents for 66201 KF-N
Page 1: ...66201 KF N Ceramic hob Installation and Operating Instructions ...
Page 31: ...31 Assembly ...
Page 32: ...32 ...
Page 33: ...33 ...
