22
Electrical connection for the UK
Appliances with 2 wires
The appliance must be connected to fixed wiring with a
double pole switched fused spur outlet with or without pilot
lamp.
We strongly recommend the appliance to be connected only
by a qualified electrician who is a member of the NICEIC who
will comply with the IEE and any local regulations.
NOTE:
The terminology “DOUBLE POLE” means that both the live
and the neutral supplies are switched and disconnected at the
same time.
The terminations labelled SUPPLY are for the connection for
the internal house wiring and the terminations labelled LOAD
are for the appliance.
IMPORTANT
The wires of the mains lead supplied with this appliance
are coloured in accordance with the following code:
Blue-Neutral
Brown-Live
As the colours of the flexible cord of this appliance may
not correspond with the coloured markings identifying the
terminals in the plug, proceed as follows: The wire which
is coloured brown must be connected to the terminal which
is marked with the letter L or coloured red.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
N
LOAD
L
SUPPLY
L
LOAD
N
SUPPLY
DP 13A, 250V
BLUE
(NEUTRAL)
BROWN
(LIVE)
FUSE
ON
