AEG 911434550, User Manual

Problem and alarm code

Possible cause and solution

The appliance trips the cir-
cuit-beaker.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.
For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 

The product number

code (PNC)

If you contact an Authorised Service

Centre, you need to provide the product

number code of your appliance.
The PNC can be found on the rating

plate on the appliance door. You can

also check the PNC on the control panel.

Before checking the PNC, make sure the

appliance is in the programme selection.

1.

Press and hold simultaneously   and

 for about 3 seconds.

The display shows the PNC of your

appliance.

2.

To exit the PNC presentation, press
and hold simultaneously   and 

for about 3 seconds.

The appliance returns to the programme

selection.

11.2 

The washing and drying results are not satisfactory

Problem

Possible cause and solution

Poor washing results.

• Refer to 

"Daily use"

, 

"Hints and tips"

 and the basket

loading leaflet.

• Use more intensive washing programme.
• Activate the SprayZone option to wash items with

heavy or stubborn soil.

• Activate the ExtraPower option to improve the wash-

ing results of a selected programme.

• Clean spray arm jets and filter. Refer to 

"Care and

Cleaning"

.

ENGLISH

23