5.
Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6.
Put back in place the flat filter (
A
).
Make sure that it is correctly
positioned under the 2 guides.
7.
Reassemble the filters (
B
) and (
C
).
8.
Put back the filter (
B
) in the flat filter
(
A
). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.2
Cleaning the spray arms
Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
11.3
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
11.4
Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• If you regularly use short duration
programmes, these can leave
deposits of grease and limescale
inside the appliance. To prevent this,
we recommend to run long duration
programmes at least 2 times per
month.
• To maintain the performance of your
appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.
12.
TROUBLESHOOTING
If the appliance does not start or it stops
during operation, first check if you can
ENGLISH
65
Summary of Contents for 911514005
Page 71: ...ENGLISH 71 ...
