Problem
Possible cause
Remedy
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If
comes
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model IBB64200CB
PNC 949 492 536 00
Typ 64 B4A 00 AA
220 - 240 V / 400 V 2N, 50 / 60 Hz
Induction 6.9 kW
Made in: Romania
Ser.Nr. .................
6.9 kW
AEG
9.2 Cooking zones specification
Cooking zone
Nominal power
(maximum heat
setting) [W]
Booster [W]
Booster maxi‐
mum duration
[min]
Cookware diame‐
ter [mm]
Left front
2200
2400
4
125 - 210
Left rear
1400
1500
4
125 - 145
Right front
1400
1500
4
125 - 145
Right rear
1700
1800
4
150 - 180
The power of the cooking zones can be
different in some small range from the data in
the table. It changes with the material and
dimensions of the cookware.
For optimal cooking results use cookware no
larger than the diameter in the table.
30 ENGLISH