Problem
Possible cause
Remedy
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
The STOP+GO function
operates.
Refer to the chapter “Dai-
ly Use”.
There is water or fat
stains on the control
panel.
Clean the control panel.
An acoustic signal
sounds and the appli-
ance deactivates.
An acoustic signal
sounds when the appli-
ance is deactivated.
You put something on
one or more sensor
fields.
Remove the object from
the sensor fields.
The appliance deacti-
vates.
You put something on
the sensor field
.
Remove the object from
the sensor field.
The residual heat indica-
tor does not come on.
The cooking zone is not
hot because it operated
only for a short time.
If the cooking zone oper-
ated sufficiently long to
be hot, speak to the serv-
ice centre.
The Automatic Heat Up
function does not oper-
ate.
The cooking zone is hot. Let the cooking zone be-
come sufficiently cool.
The highest heat setting
is set.
The highest heat setting
has the same power as
the Automatic Heat Up
function.
You decreased the heat
setting from
.
Start from
and only in-
crease the heat setting.
You cannot activate the
outer ring.
Activate the inner ring
first.
The sensor fields be-
come hot.
The cookware is too
large or you put it too
near to the controls.
Put large cookware on
the rear cooking zones if
necessary.
comes on.
The Automatic Switch
Off operates.
Deactivate the appliance
and activate it again.
comes on.
The Child Safety Device
or the Lock function op-
erates.
Refer to the chapter “Dai-
ly Use”.
ENGLISH
13
