AEG A62710GNX1, User Manual

The set temperature will be

reached within 24 hours.

After a power failure the set

temperature remains stored.

3.5 

High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure) is indicated by:
• flashing of the alarm and freezer

temperature indicators;

• sounding of the buzzer.
Press any button to reset the alarm.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a

few seconds. Then show again the set

temperature.

The alarm indicator continues to flash

until the normal conditions are restored.

3.6 

FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

1.

Press Mode button until the

corresponding icon appears.

The FROSTMATIC indicator flashes.

2.

Press OK button to confirm.

The FROSTMATIC indicator is shown.

The FROSTMATIC function

shuts off automatically after

52 hours.

To switch off the function

before its automatic end,

repeat the steps until the

FROSTMATIC indicator goes

off.

3.7 

Door open alarm

An acoustic alarm will sound if the door

is left open for a few minutes. The door

open alarm conditions are indicated by:
• a flashing Alarm indicator;

• an acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop. The

buzzer can also be switched off by

pressing any button.

3.8 

MinuteMinder function

The MinuteMinder function is to be used

to set an acoustic alarm at the preferred

time, useful for example when a recipe

requires to cool down food products for

a certain length of time.
It is also useful when a reminder is

needed in order not to forget the bottles

placed in the freezer for fast cooling.

1.

Press Mode until the corresponding

icon appears.

The MinuteMinder indicator flashes.

The Timer shows the set value (30

minutes) for a few seconds.

2.

Press the Temperature colder or

Temperature warmer button to

change the Timer set value from 1 to

90 minutes.

3.

Press OK to confirm.

The MinuteMinder indicator is shown.

The Timer starts to flash (min).

It is possible to change the time at any

time during the countdown and at the

end by pressing the Temperature colder

button and the Temperature warmer

button.
At the end of the countdown, the

MinuteMinder indicator flashes and an

audible alarm sounds. Press OK to switch

off the sound and terminate the function.
It is possible to deactivate the function at

any time during the countdown by

repeating the function steps, until the

indicator turns off.

3.9 

ChildLock function

Activate the ChildLock function to lock

the buttons from unintentional

operation.

1.

Press Mode until the corresponding

icon appears.

The ChildLock indicator flashes.

2.

Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

ENGLISH

7