3.
PRODUCT DESCRIPTION
3.1
Installing the SpinView
®
tray
CAUTION!
Clean the accessory with a
soft moist cloth before first
use. Maximum load allowed
on the tray is 15 kg.
1.
Remove the glass shelf from the
fridge.
2.
Remove the back trim from the glass
shelf
3.
Slide in the SpinView
®
clamps on the
glass shelf back edge.
4.
Mount the SpinView
®
tray. Make sure
that the clamp pins fit into special
indentations at the base of the tray.
Check if the SpinView
®
tray is
mounted properly by moving it
gently forwards and backwards.
5.
Place the shelf with the clamps inside
the fridge. Push the shelf until the
clamps lock inside the compartment.
3.2
SpinView
®
tray
The SpinView
®
tray rotates 360 degrees
in both directions for better visibility and
reachability of the stored products.
To rotate the tray grab it by the brim and
slowly spin it clockwise or counter-
clockwise.
Always return the tray to its neutral
position before closing the door.
CAUTION!
Do not spin the tray too fast
and do not place your
fingers under the tray or on
the sides.
The glass shelf mounted with the
SpinView
®
tray can be positioned on
different levels inside the fridge.
ZZZDHJFRP
Summary of Contents for A6RHSW31
