4.
OPERATION
4.1
Control panel
1
2
3
4
5
1
Power indicator light
2
Temperature regulator
3
FROSTMATIC light
4
FROSTMATIC switch and alarm reset
switch
5
Alarm light
4.2
Switching on
• Insert the plug into the wall socket
• Turn the Temperature regulator
clockwise to a medium setting.
If the temperature inside the appliance is
too high the Alarm light will blink. Active
the FROSTMATIC function.
4.3
Switching off
1.
Turn the Temperature regulator to
the "O" position.
The power indicator light will switch
off.
2.
Remove the plug from the wall
socket
4.4
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance
yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1.
Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2.
Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
4.5
FROSTMATIC function
You can activate the FROSTMATIC
function by pressing the FROSTMATIC
switch.
TheFROSTMATIC light will light up.
This function stops
automatically after 52 hours.
It is possible to deactivate
the function at any time by
pressing FROSTMATIC
switch.
The FROSTMATIC light will
switch off.
4.6
Door open alarm
An acoustic alarm will sound when the
door is left open for around 80 seconds.
www.aeg.com
22
Summary of Contents for ABB66011AS
Page 62: ...www aeg com 62 ...
Page 63: ...DEUTSCH 63 ...