AEG ACS58B18, Instructions Manual

25

25

TECHNICAL DATA 

CORDLESS CHAINSAW

ACS58B18

Rated voltage 

 58 V             

Max bar length 

 450 mm             

Chain oil tank capacity 

 177 ml             

Weight (without battery pack, with guide bar, chain and empty tank) 

 5.08 kg             

Usable cutting length 

 385 mm             

Max no-load speed 

 21 m/s             

Vibration level (in accordance with EN 60745-1 & EN 60745-2-13)
Front handle 

2.9 m/s

2

Rear handle 

3.7 m/s

2

Uncertainty of measurement 

1.5 m/s

2

Noise emission level (in accordance with EN 60745-1 & EN 60745-2-13)
A-Weighted sound pressure level at operator’s position 

90.8 dB (A)

Uncertainty of measurement 

2.5 dB

A-Weighted sound power level 

101.8 dB (A)

Uncertainty of measurement 

2.5 dB

BATTERY AND CHARGER

Model

ACS58B18

Battery pack

Not included

Charger

Not included

Compatible battery packs

ABP58LI-401

Compatible charger

ABC58S, ABC58FX

REPLACEMENT PARTS

Bar

Part number

315256001

Chain

Part number

 PWFTCA1802 (POWERFIT)

Length

18 in. ( 45.7 cm)

Pitch

0.375 in. (0.953 cm)

Gauge

0.05 in. (0.127 cm)

Drive links

62

WARNING!

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and 
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with 
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but 
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the 
hands warm, organisation of work patterns.

INTENDED USE

The product is intended for use outdoor use only. For safety reasons, 
the product must be adequately controlled by using a two-handed 
operation at all times.

The product is designed for cutting branches, trunks, logs, and beams 
of a diameter determined by the cutting length of the guide bar. It is 
designed to cut wood only. 
The product is to be used only in domestic applications by adults who