AEG AGB625F5NW, User Manual

4.4 Temperature regulation

Set the temperature of the appliance by

pressing the temperature regulators.

Recommended set temperature is:

• -18°C for the freezer

The temperature range may vary

between -15°C and -24°C for freezer.

The temperature indicators show the set

temperature.

The set temperature will be

reached within 24 hours.

After a power failure the set

temperature remains stored.

4.5 FROSTMATIC function

The FROSTMATIC is used to perform

pre-freezing and fast freezing in

sequence of Freezer compartment. This

function accelerates the freezing of fresh

food and, at the same time, protects

foodstuffs already stored from

undesirable warming.

To freeze fresh food activate

the FROSTMATIC function

at least 24 hours before

placing the food to complete

pre-freezing.

1. To activate this function press the

Mode button until the corresponding

icon appears.

The FROSTMATIC indicator flashes.

2. Press the OK button to confirm.

The FROSTMATIC indicator is shown.

This function stops automatically after 52

hours.
You can deactivate the FROSTMATIC

function before its automatic end by

repeating the procedure until the

FROSTMATIC indicator turns off or by

selecting a different set temperature.

4.6 ChildLock function

Activate the ChildLock function to lock

the buttons from unintentional operation.

1. Press Mode until the corresponding

icon appears.

The ChildLock indicator flashes.

2. Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

4.7 DrinksChill function

The DrinksChill function is to be used to

set an acoustic alarm at the preferred

time, useful for example when a recipe

requires to cool down food products for a

certain period of time.
It is also useful when a reminder is

needed in order not to forget the bottles

or cans placed in the freezer for fast

cooling.

1. Press Mode until the corresponding

icon appears.

The DrinksChill indicator flashes.

The Timer shows the set value (30

minutes) for a few seconds.

2. Press the Timer regulator to change

the Timer set value from 1 to 90

minutes.

3. Press OK to confirm.

The DrinksChill indicator is shown.

The Timer starts to flash (min).

At the end of the countdown the "0 min"

indicator flashes and an audible alarm

sounds. Press OK to switch off the sound

and terminate the function.
To switch off the function repeat the

procedure until the DrinksChill goes off.

It is possible to change the

time at any time during the

countdown and at the end by

pressing the Temperature

colder button and the

Temperature warmer button.

4.8 High temperature alarm

When there is a temperature increase in

the freezer compartment (for example

due to an earlier power failure), the alarm

and freezer temperature indicators flash

and the sound is on.

To deactivate the alarm:

1. Press any button.

The sound switches off.

2. The freezer temperature indicator

shows the highest temperature

reached for a few seconds, then the

display shows the set temperature

again.

www.aeg.com

10