![background image](http://html.mh-extra.com/html/aeg/ags58800s0/ags58800s0_user-manual_10701015.webp)
4.
With a key, loosen the lower pin.
On the opposite side:
1.
Tighten the lower pin.
2.
Install the spacer.
3.
Install the door.
4.
Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do the following steps:
1.
If necessary cut the adhesive sealing
strip and then apply it to the appliance
as shown in figure.
5 cm
min.
200 cm
2
min.
200 cm
2
x
x
Installation
15
Summary of Contents for AGS58800S0
