Make sure the water does
not spill out of the tray.
8. Clean the interior and dry it
thoroughly.
9. Switch on the appliance.
10. Set the temperature to higher setting
and close the lid. Wait two or three
hours before you reload previously
removed food into the appliance.
11. Set the temperature to the desired
setting.
10. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
10.1 What to do if...
There are sounds which may occur during the operation of the appliance
(e.g. bubbling, whirring, cracking or clicking), which are normal.
Problem
Possible cause
Solution
The appliance does not op‐
erate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con‐
nected to the mains socket
correctly.
Check if the appliance is
plugged correctly.
There is no voltage in the
mains socket.
Connect the appliance to a
different electrical mains
socket. Contact a qualified
electrician.
The appliance is noisy.
The appliance is not suppor‐
ted properly.
Check if the appliance
stands stable. Refer to "In‐
stallation/Location" chapter.
The appliance touches the
wall or other objects.
Slightly move the appliance.
Refer to "Installation/Loca‐
tion" chapter.
"E0" symbol and current
temperature are displayed
alternately.
Temperature sensor failure.
Contact the Authorised
Service Center.
The lid does not close com‐
pletely.
Food packages are blocking
the lid.
Arrange the packages in the
right way.
There is too much frost in
the appliance.
Defrost the appliance. Refer
to "Care and cleaning/
Defrosting the appliance"
chapter.
The lid is difficult to open.
The lid gasket is dirty or
sticky.
Clean the lid gasket.
ENGLISH
33
