background image

26

26

10

9

NOTE:

 Store the product in a cool, dry, and well-

ventilated area that is inaccessible to children. 
Keep the product away from corrosive agents, 
such as garden chemicals and de-icing salts. Do 
not store the product outdoors.

TECHNICAL DATA

  

CORDLESS LAWNMOWER

ALM58SP24

Rated voltage  

 

 58 V d.c.

Width of cut  

 

 52.5 cm

Height of cut  

 

 18 - 75 mm

Rated input 

 

 1200 W

No-load speed 

 

 2650/min

Weight (without battery)  

 

 34.6

 

kg

Weight (with  x 2 heaviest battery packs)  

 

 38.2 kg

Grass catcher capacity  

 

 

70 L

Blade bolt tightening torque 

 

35~40 Nm

Blade length  

 

 

52.5 cm

Cutting capacity  

 

52.5 cm

Noise level (according to EN 60335-2-77 Annex GG)

A-weighted sound pressure level at the operator position 

 

L

pA 

 

81.1 dB(A)

Uncertainty 

 

 

K

 

 

3.0 dB

A-weighted sound power level 

 

 

L

WA  

= 93.3 dB(A)

Uncertainty 

 

 

K

 

 

3.0 dB

L

WA

+

K

WA

 

 

 97 dB (A) 

Vibration level (according to EN 60335-2-77 Annex FF) 

 

 

a

 

0.1 m/s

2

Uncertainty 

  

 

1.5 m/s

2

 

WARNING!

The declared vibration value has been measured with a standard test method and may be used to compare one tool with another. The declared 
vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can differ from the declared total value depending on the ways in which the tool is used. 
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the 
operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.

BATTERY AND CHARGER

Model

ALM58SP24

ALM58SP

Battery pack

A58BAT14

 x 2

-

Charger

ABC58S

-

Compatible battery 

packs

ABP58LI-401, 

A58BAT14

REPLACEMENT PART

Blade

682282004

Mulch plug

314362004

Grass catcher

314361004

INTENDED USE

The cordless lawnmower is intended for outdoor use only.
The product is designed for domestic lawn mowing.  It is a pedestrian-
controlled walk-behind mower designed to be pushed by hand or 
used with the self-propel feature.
The product should never be operated with the wheels off the ground.  
It should not be pulled or ridden on. 
Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

Keep the instructions safe for later use.
The product should be operated only with the battery packs specified 

Summary of Contents for ALM58SP24

































Reviews: