30
Starting up and temperature regulation
Please clean the appliance interior and all accessories prior to star-
ting the appliance. Plug in the appliance at the mains supply.
• Turn the ON/OFF knob (1). The green lamp (5) comes on.
• Turn the temperature regulator (1) in the direction of „1“.
• The red lamp (4) comes on, the audible warning sounds , and the
refrigeration motor starts up.
• Operate the fast-freeze knob (2). The yellow pilot lamp (3) comes on
and the audible warning stops.
• Only when the red lamp (4) has gone out should you reset the fast-
freeze knob (2) the yellow light (3) goes out.
Setting “0”: Off.
Setting “1”: Hightest temperature, (warmest setting).
Setting “4” (end-stop) : Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the tempe-
rature inside the appliance depends on:
- the quantity of food stored
- how often the door is opened
- ambient temperature
Important:
Regularly check on the red temperature pilot lamp (4) that the requi-
red storage temperature is being maintained.
The red temperature pilot-lamp (4) comes on when:
– the appliance has been started up but the storage temperature has
not yet been attained;
– the minimum storage temperature is no longer being maintained
(fault);
– excessive amounts of fresh food are placed inside; or
– if the appliance door is open for too long.
Important note: if you operate the fast-freeze switch or adjust the
temperature regulator, it may happen that your appliance’s refrigera-
tion motor does not start immediately but only after some time. This
does not mean that your appliance has a fault.
