27
Rehingeing the door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the
appliance may not be connected to the mains. Remove plug from the
mains beforehand.
Procced as follow:
1.
Remove the bottom hinge (1) and
feets (2-3).
2.
Slide the bottom door off pin (G);
unscrew pin (G) and refit it on the
opposite side.
3.
Remove the two plugs, to reveal
the holes for the hinge pivots, and
remount them on the other side.
4.
Refit the door.
5.
Refit bottom hinge (1) and feets
(2-3) on the opposite side, using
the two screws previously remo-
ved.
6.
Unscrew the handle. Refit it on
opposite side after having pierced
the plugs with a punch. Cover the
holes left open with the plugs con-
tained in the documentation pack.
Your appliance needs air
For safety reasons, minimum
ventilationmust be as shown
Fig.
Attention: keep ventilation
openings clear of obstruc-
tion;
100 mm
10 mm
10 mm
A
B
NP007
D715 PIED/M
1
2
3
D
D590