818 19 94-00/8
19
Initial use
0
1.
Insert plug into mains socket.
2.
Press ON/OFF button. The green pilot light illuminates. The compressor
starts and then runs automatically.
A warning tone sounds and the red warning light flashes indicating
that the required storage temperature has not yet been reached.
3.
Press the WARNING OFF button to switch off the warning tone.
4.
Set temperature to -18 °C or colder (see section: "Temperature Adjust-
ment").
Important!
Wait until the freezer compartment has reached a tempera-
ture of –18 °C, or the red warning light has gone out, before storing
frozen food.
Temperature Adjustment
0
1.
Press either the „+“ (WARMER) or „-“ (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2.
To adjust to a warmer temperature, press the „+“ button. To adjust to a
colder temperature, press the „-“ button. The changed setting is imme-
diately displayed on the temperature display.
The temperature is adjusted by one display field with each press of a
button.
Note:
From a food safety point of view, -18 °C for the freezer compart-
ment should be considered cold enough as a storage temperature.
3
If the buttons are not pressed again for approx. 5 seconds the tempera-
ture display will change from the DESIRED temperature to the ACTUAL
temperature. The display changes from flashing to continuous illumina-
tion.
Important!
Please check red warning display and temperature display
regularly to assure maintenance of the storage temperature.