818 2113-00/4
15
Control panel
1
Warning indicator light (red)
2
Fast freeze indicator light (yellow)
3
Fast freeze button
4
Mains power light (green)
5
Temperature regulator and ON/OFF-switch
Prior to Initial Start–Up
1
Before connecting the appliance to the mains and putting it into oper-
ation for the first time, leave the appliance to stand for 30 minutes if
was transported upright. After transport on its side, the appliance must
be left to stand for 2 hours before putting it into operation. This is nec-
essary to allow the refrigerant to flow back into the compressor. Other-
wise the compressor may be damaged.
0
1.
Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Maintenance and Cleaning”).