Symbol
Function
Fast Heat Up Indicator
The function is active. It decreases the
heat up time.
Weight Automatic
The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold
The function is active.
5.
BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2
First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast,
the display brightness and the time of
the day.
1.
Press
or
to set the value.
2.
Press
to confirm.
5.3
Setting the hardness level
for the water
When you connect the appliance to the
mains, you have to set the water
hardness level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Water hardness
Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water classi-
fication
Class
dH
1
0 - 7
0 - 1.3
0 - 50
Soft
2
7 - 14
1.3 - 2.5
50 - 100
Moderately
hard
3
14 - 21
2.5 - 3.8
100 - 150
Hard
4
over 21
over 3.8
over 150
Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1.
Take the four colour change strip
supplied with the steam set in the
oven.
2.
Put all the reaction zones of the strip
into the water for approximately 1
second.
www.aeg.com
10
Summary of Contents for BD740SV
Page 1: ...USER MANUAL EN User Manual Steam oven BD740SV ...
Page 65: ...ENGLISH 65 ...
Page 66: ...www aeg com 66 ...
Page 67: ...ENGLISH 67 ...