Install the heating element in the
opposite sequence.
Install the shelf supports.
WARNING!
Make sure that the heating
element is correctly installed
and that it does not fall
down.
10.6
Cleaning the oven door
The oven door has three glass
panels.You can remove the oven door
and the internal glass panels to clean
them.
The oven door can close if
you try to remove the glass
panels before you remove
the oven door.
CAUTION!
Do not use the appliance
without the glass panels.
1.
Open the door fully and hold the two
door hinges.
2.
Lift and turn the levers on the two
hinges.
3.
Close the oven door halfway to the
first opening position. Then pull
forward and remove the door from its
seat.
4.
Put the door on a soft cloth on a
stable surface.
5.
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
1
2
B
6.
Pull the door trim to the front to
remove it.
7.
Hold the door glass panels by their
top edge and carefully pull them out
one by one. Start from the top panel.
www.aeg.com
20
Summary of Contents for BE200300KM
Page 1: ...EN User Manual Oven BE200300KM ...
Page 25: ...ENGLISH 25 ...
Page 26: ...www aeg com 26 ...
Page 27: ...ENGLISH 27 ...