Clock function
Application
SET+GO
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
MINUTE MINDER
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the appliance is off.
00:00
COUNT UP TIMER
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance. It is on immediately when the oven
starts to heat. The COUNT UP TIMER is not activated if
DURATION and END are set.
7.2
Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
12:00
.
"
12
" flashes.
1.
Touch
or
to set the hours.
2.
Touch
or .
3.
Touch
or
to set the minutes.
4.
Touch
or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3
Setting the DURATION
1.
Set an oven function and
temperature.
2.
Touch again and again until
starts to flash.
3.
Use
or
to set the minutes for
DURATION time.
4.
Touch
or the DURATION time
starts automatically after 5 seconds.
5.
Use
or
to set the hours for
DURATION time.
6.
Touch
. The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes. and time
setting flash in the display. The appliance
deactivates.
7.
Touch a sensor field or open the
oven door to stop the acoustic
signal.
8.
Turn off the appliance.
7.4
Setting the END
1.
Set an oven function and
temperature.
2.
Touch again and again until
starts to flash.
3.
Use
or
to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes. and the
time setting flash in the display. The
appliance deactivates automatically.
4.
Touch a sensor field or open the
oven door to stop the acoustic
signal.
5.
Turn off the appliance.
7.5
Setting the TIME DELAY
function
1.
Set an oven function and
temperature.
2.
Touch again and again until
starts to flash.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
.
5.
Use
or
to set the hours for
DURATION.
www.aeg.com
12