15
14
BGE18
..................... 4670 55 01...
...000001-999999
.........................288 W
...........................16 A
18700 / 13300 / 11500 min
-1
....... 200 / 155 / 112 km/h
..........2,9 / 2,2 / 1,8 m
3
/min
...........................18 V
.............1,62 .. 2,35 kg
........................1,15 kg
...........................84 dB (A)
..........................2,5 dB (A)
........................94,5 dB (A)
........................1,74 dB (A)
.......................≤ 2,5 m/s
2
..........................1,5 m/s
2
If the product is dropped, suff ers heavy impact or begins to
vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by an
authorised service centre.
Do not use in the rain or leave outdoors while it is raining.
Maintenance and storage
When the machine is stopped for servicing, inspection, or
storage, or to change an accessory, remove the battery and
make sure that all moving parts are come to a complete
stop. Allow the machine to cool before making any
inspections, adjustments, etc. Maintain the machine with
care and keep it clean.
Store the machine in a dry place out of the reach of children.
Always allow the machine to cool before storing.
Do not modify this blower. Unauthorized modifi cations may
impair the safety of your product and may result in
increased noise and vibration.
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Examine the machine and replace worn or damaged parts
for safety.
Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessorises.
Never attempt to override the interlocked feature of the
guard.
Do not modify this blower. Unauthorized modifi cations may
impair the safety of your product and may result in
increased noise and vibration.
ADDITIONAL SAFETY INSTRUCTIONS
Never allow children, persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age
of the operator.
Remove the battery pack before
starting any work on the machine.
Do not dispose of used battery packs
in the household refuse or by burning
them. AEG Distributors off er to retrieve
old batteries to protect our
environment.
Do not store the battery pack together
with metal objects (short circuit risk).
Use only System GBS chargers for
charging System GBS battery packs.
Do not use battery packs from other
systems.
ENGLISH
Battery acid may leak from damaged
batteries under extreme load or
extreme temperatures. In case of
contact with battery acid wash it off
immediately with soap and water. In
case of eye contact rinse thoroughly
for at least 10 minutes and
immediately seek medical attention.
Warning!
To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
RESIDUAL RISK
Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual
risk factors. The following hazards may
arise in use and the operator should
pay special attention to avoid the
following:
• Injury caused by vibration
Hold the product by designated
handles and restrict working time
and exposure.
• Exposure to noise can cause
hearing injury
Wear ear protection and limit
exposure.
• Injury due to fl ying debris
Wear eye protection, heavy long
trousers, gloves and substancial
footwear at all times.
SPECIFIED CONDITIONS OF USE
The cordless blower is intended for
blowing of dirt and leaves.
Do not use this product in any other
way as stated for normal use.
ENGLISH
TECHNICAL DATA
CORDLESS BLOWER
Production code..................................................................................................
Rating power ......................................................................................................
Rating input current ............................................................................................
No-load speed 1 / 2 / 3 .......................................................................................
Air speed 1 / 2 / 3 ...............................................................................................
Air fl ow rate 1 / 2 / 3............................................................................................
Battery voltage....................................................................................................
Weight according EPTA-Procedure 01/2014 (with Li-Ion b attery 1.5 Ah ... 9.0 Ah) .........
Weight without Li-Ion Battery ..............................................................................
Noise/vibration information
Measured values determined according to EN 50636-2-100 Annex CC.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level L
pA
(at operators ear) .....................................................
Uncertainty K= .................................................................................................
Sound power level L
WA
+K
WA
.............................................................................
Uncertainty K= .................................................................................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 50636-2-100 Annex BB.
Handle Vibration ..............................................................................................
Uncertainty K= .................................................................................................
WARNING Read these instructions carefully, be
familiar with the controls and the proper use of the
machine.
Save all warnings and instructions for future
reference.
CORDLESS BLOWER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls
and the correct use of the machine.
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to
use the machine, local regulations may restrict the age of
the operator.
Keep in mind, that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
Obtain ear protection and safety glasses. Wear them at all
times while operating the machine.
While operating the machine always wear substantial
footwear and long trousers. Do not operate the machine
when barefoot or wearing open sandals. Avoid wearing
clothing that is loose fi tting or that has hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn
into the air inlet. Keep long hair away from the air inlets.
Operate the machine in a recommended position and only
on a fi rm, level surface.
Do not operate the machine on a paved or gravel surface
where ejected material could cause injury.
Never operate the machine while people, especially
children, or pets are nearby.
Operation
Always stand clear of the discharge zone when operating
this machine.
If the machine becomes clogged, remove the battery before
cleaning debris.
Never operate the machine with defective guards or shields,
or without safety devices, for example debris collector in
place.
Stop the machine, and remove the battery from the tool.
Make sure that all moving parts have come to a complete
stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
The blower shall not be used for sucking!
Do not blow hot, fl ammable or explosive material.
Use the machine only in daylight or good artifi cial light.
Always be sure of your footing on slopes.
Never blow in the direction of bystanders. Do not operate
without tubes in place.
Walk, never run.
Keep all cooling air inlets clear of dirt.
Pay attention that bystanders are not injured through foreign
objects thrown from the machine.
Do not use for sucking liquids!
Do not overreach and keep your balance at all times.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 50636-2-100 Annex BB and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
Summary of Contents for BGE18
Page 3: ...4 5 12 6 8 11 9 START STOP 10 ...
Page 5: ...8 9 START STOP ...
