5
5
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
Spot lIGht SAFEtY WARNINGS
Know your product. Read operator’s manual carefully. learn
its applications and limitations, as well as the specific potential
hazards related to this product.
Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Do not permit children to use work light. It is not a toy.
the product is not designed to operate in wet or damp
conditions.
Carefully position the power cord during use.
A power cord in
your walking path can be a tripping hazard.
If wrapped or in contact with fabrics, the work light lens can
produce sufficient heat to melt some fabrics.
To avoid serious
personal injury, never allow the work light lens to come in contact
with anything.
Do not place hands or fingers between adjustable head and
frame when positioning work light to avoid possible pinching.
Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition.
Be aware of
possible hazards when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
Do not place the product or their batteries near fire or heat.
This
will reduce the risk of explosion and possibly injury.
To reduce the risk of personal injury and electric shock, the
product should not be played with or placed where small
children can reach it.
to reduce the risk of electric shock, do not expose to water
or rain.
Save these instructions.
Refer to them frequently and use them to
instruct others who may use this tool. If you loan someone this tool,
loan them these instructions also to prevent misuse of the product
and possible injury.
Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance).
Staring into the light beam may result in serious injury or vision loss.
Use only with recommended battery pack and charger. Any
attempt to use another battery pack will cause damage to the
product and could possibly explode, cause a fire, or personal
injury.
Do not disassemble the product.
Do not store the product in a damp or wet location, or in a
location where the temperature may reach or exceed 40°C
(104°F).
For example, inside sheds, vehicles, or metal buildings in
the summer.
the product is non-dimmable; do not connect with any
dimmers.
Always power the product from a standard domestic supply.
Power from generators or inverters may cause the product to
malfunction.
Check damaged parts.
Before further use of the product, a part
that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Do not use the
product if it does not function properly.
Have the product repaired by a qualified person.
The product
is in accordance with the relevant safety requirements. Repairs
should only be carried out by qualified person using original spare
parts, otherwise this may result in considerable danger to the user.
the light source of this luminaire is not replaceable; when the
light source reaches its end of life the whole luminaire shall
be replaced.
tEChNICAl DAtA
18V / 12V Spot lIGht
BhSl18
Rated voltage
18V
/ 12V
adaptor
Power
35 watts
Light output
2100 lumens
Runtime (6.0 Ah at low setting)
High power
5 hours
Low power
36 hours
Colour rendering index (CRI)
70
Correlated colour temperature (CCT)
6200 K
Beam angle
10 degrees
BAttERY AND ChARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
AL1218G
BL1218
BLK1218
BL18DP-X5
Use AEG 18V battery and charger only
Summary of Contents for BHSL18
Page 1: ......
