5.4
Buttons
Button
Function
Description
MINUS
To set the time.
CLOCK
To set a clock function.
PLUS
To set the time.
5.5
Heat-up indicator
When you activate an oven function, the
bars in the display come on one by
one. The bars show that the oven
temperature increases or decreases.
6.
CLOCK FUNCTIONS
6.1
Clock functions table
Clock function
Application
TIME OF DAY
To set, change or check the time of day. Refer to "Set-
ting the time".
MINUTE MINDER
Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
DURATION
To set how long the appliance operates. Use only when
an oven function is set.
END
To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
Press again and again to
switch between the clock
functions.
To confirm the settings of
the clock functions, press
or wait 5 seconds for an
automatic confirmation.
6.2
Setting the DURATION or
END
1.
Press again and again until the
display shows
or
.
or
flashes in the display.
2.
Press or to the set the values
and press to confirm.
For Duration
first you set the minutes
and then the hours, for End
first you
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
or
symbol
and time setting flash in the display. The
oven stops.
3.
Turn the knob for the oven functions
to the off position.
4.
Press any button or open the oven
door to stop the acoustic signal.
www.aeg.com
10
Summary of Contents for BP200302
Page 1: ...EN User Manual Oven BP200302 ...
Page 29: ...ENGLISH 29 ...
Page 30: ...www aeg com 30 ...
Page 31: ...ENGLISH 31 ...
