seconds the display shows the software
version.
After the software version goes off, the
display shows
and "
12:00
". "
12
"
flashes.
1.
Press or to set the current
hour.
2.
Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows
and the set
hour. "
00
" flashes.
3.
Press or to set the current
minutes.
4.
Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows the new time.
4.3
Changing the time
You can change the time of day only if
the oven is off.
Press again and again until the
indicator for the time of day flashes in
the display.
To set a new time, refer to "Setting the
time".
4.4
Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function and the
maximum temperature.
2.
Let the appliance operate for 1 hour.
3.
Set the function and set the
maximum temperature.
4.
Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
5.
DAILY USE
WARNING!
Refer to Safety chapters.
5.1
Activating and
deactivating the appliance
It depends on the model if
your appliance has knob
symbols, indicators or
lamps:
• The indicator comes on
when the oven heats up.
• The lamp comes on when
the appliance operates.
• The symbol shows
whether the knob
controls the oven
functions or the
temperature.
1.
Turn the knob for the oven functions
to select an oven function.
2.
Turn the knob for the temperature to
select a temperature.
3.
To deactivate the appliance turn the
knobs for the oven functions and
temperature to the off position.
www.aeg.com
8
Summary of Contents for BP200302
Page 1: ...EN User Manual Oven BP200302 ...
Page 29: ...ENGLISH 29 ...
Page 30: ...www aeg com 30 ...
Page 31: ...ENGLISH 31 ...