4.2
Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
and "
12:00
". "
12
"
flashes.
1.
Press or to set the current
hour.
2.
Press to confirm or the set hour
will be saved automatically after 5
seconds.
The display shows
and the set
hour. "
00
" flashes.
3.
Press or to set the current
minutes.
4.
Press to confirm or the set
minutes will be saved automatically
after 5 seconds.
The display shows the new time.
4.3
Changing the time
You can change the time of day only if
the oven is off.
Press again and again until the
indicator for the time of day flashes in
the display.
To set a new time, refer to "Setting the
time".
4.4
Preheating
Preheat the empty appliance to burn off
the remaining grease.
For True Fan Cooking PLUS
function refer to "Activating
the True Fan Cooking PLUS
function".
1.
Set the function and the
maximum temperature.
2.
Let the appliance operate for 1 hour.
3.
Set the function and set the
maximum temperature.
4.
Let the appliance operate for 15
minutes.
5.
Set the function
, press
and
set the maximum temperature.
6.
Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
5.
DAILY USE
WARNING!
Refer to Safety chapters.
5.1
Activating and
deactivating the appliance
It depends on the model if
your appliance has lamps,
knob symbols or
indicators:
• The lamp comes on when
the appliance operates.
• The symbol shows
whether the knob
controls the oven
functions or the
temperature.
• The indicator comes on
when the oven heats up.
www.aeg.com
8
Summary of Contents for BP300306K
Page 1: ...EN User Manual Oven BP300306K ...
Page 33: ...ENGLISH 33 ...
Page 34: ...www aeg com 34 ...
Page 35: ...ENGLISH 35 ...