13.
WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does not
heat up.
The appliance is deacti-
vated.
Activate the appliance.
The appliance does not
heat up.
The time of day is not
set.
Set the clock. Refer to
"Setting and changing
the time”.
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The appliance does not
heat up.
The automatic switch-off
is activated.
Refer to „Automatic
switch-off“.
The appliance does not
heat up.
The fuse is released.
Make sure that the fuse
is the cause of the mal-
function. If the fuse re-
leases again and again,
contact a qualified elec-
trician.
The lamp does not oper-
ate.
The lamp is defective.
Replace the lamp.
The display shows C1.
You want to start the py-
rolytic cleaning but you
did not remove the shelf
support/telescopic run-
ners.
Remove the shelf sup-
port/telescopic runners.
The display shows C2.
You want to start the py-
rolytic cleaning, keep
warm or defrost function
but you did not remove
core temperature sensor
plug from the socket.
Remove the core tem-
perature sensor plug
from the socket.
The display shows C3.
You want to start the py-
rolytic cleaning but you
did not fully close the
door.
Fully close the door.
The display shows F102.
The door lock is defec-
tive.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
F102 again, contact
the Customer Care
Department.
38 www.aeg.com
Summary of Contents for BP7304021
Page 1: ...BP7304021 BP7304151 EN User manual ...
Page 46: ...46 www aeg com ...
Page 47: ...ENGLISH 47 ...