Description
Value to set
4
KEY TONE
1)
CLICK / BEEP / OFF
5
FAULTY TONE
ON / OFF
6
SERVICE MENU
-
7
RESTORE SETTINGS
YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1.
When the appliance is activated,
touch then touch it again and
hold for three seconds.
The display shows SET1 and "1" flashes.
2.
Touch
or
to set the setting.
3.
Touch
.
4.
Touch
or
to change the value
of the setting.
5.
Touch
.
To exit the Settings menu, touch or
touch and hold .
10.5
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature (°C)
Switch-off time (h)
30 - 115
12.5
120 - 195
8.5
200 - 245
5.5
250 - maximum
1.5
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.
10.6
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
10.7
Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
www.aeg.com
20