AEG BS18C3BL, Original Instructions Manual

ENGLISH

18

WARNING! Read all safety warnings, instructions, illustrations 

DQGVSHFL¿FDWLRQVSURYLGHGZLWKWKLVSRZHUWRRO

 Failure to follow all 

LQVWUXFWLRQVOLVWHGEHORZPD\UHVXOWLQHOHFWULFVKRFN¿UHDQGRUVHULRXV

injury. 

6DYHDOOZDUQLQJVDQGLQVWUXFWLRQIRUIXWXUHUHIHUHQFH

 PERCUSSION DRILL/DRIVER SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

:HDUHDUSURWHFWRUVZKHQLPSDFWGULOOLQJ

 Exposure to noise can 

cause hearing loss.

8VHWKHDX[LOLDU\KDQGOHV

 Loss of control can cause personal injury.

%UDFHWKHWRROSURSHUO\EHIRUHXVH

 This tool produces a high output 

torque and without properly bracing the tool during operation, loss of 

control may occur resulting in personal injury.

+ROGWKHSRZHUWRROE\LQVXODWHGJULSSLQJVXUIDFHVZKHQ
SHUIRUPLQJDQRSHUDWLRQZKHUHWKHFXWWLQJDFFHVVRU\RUIDVWHQHUV
PD\FRQWDFWKLGGHQZLULQJ

 Cutting accessory or fasteners contacting 

a “live” wire may make exposed metal parts of the power tool “live” and 

could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS

1HYHURSHUDWHDWKLJKHUVSHHGWKDQWKHPD[LPXPVSHHGUDWLQJ
RIWKHGULOOELW

 At higher speeds, the bit is likely to bend if allowed to 

rotate freely without contacting the workpiece, resulting in personal 

injury.

$OZD\VVWDUWGULOOLQJDWORZVSHHGDQGZLWKWKHELWWLSLQFRQWDFW
ZLWKWKHZRUNSLHFH

 At higher speeds, the bit is likely to bend if allowed 

to rotate freely without contacting the workpiece, resulting in personal 

injury.

$SSO\SUHVVXUHRQO\LQGLUHFWOLQHZLWKWKHELWDQGGRQRWDSSO\
H[FHVVLYHSUHVVXUH

 Bits can bend causing breakage or loss of control, 

resulting in personal injury.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Clamp the workpiece with a clamping device. Unclamped workpieces 

can cause severe injury and damage.

7KHSURGXFWZLOOUHVWDUWDXWRPDWLFDOO\LIVWDOOHG7XUQRႇWKHSURGXFW

immediately if it stalls. Do not turn on the product again while it is still 

stalled, as doing so could trigger a sudden recoil with a high reactive 

force. Determine why the product stalled and rectify this, paying heed to 

the safety instructions.
The dust produced when using the product may be harmful to health. 

Do not inhale the dust. Wear a suitable dust protection mask.
Remove the battery pack before starting any work on the product.

TECHNICAL DATA 

CORDLESS PERCUSSION DRILL/DRIVER

BS18C3BL

BSB18C3BL

Production code ............................................................................................................. 4755 95 01... ... ..............

 ...000001-999999

.................. 4755 91 01... ... ..............

 ...000001-999999

Drilling capacity in steel .........................................................................................................13 mm..................... .........................13 mm
Drilling capacity in wood ........................................................................................................65 mm..................... .........................65 mm
Drilling capacity in brick and tile ................................................................................................ ........................... .........................13 mm
Wood screws (without pre-drilling) ........................................................................................10 mm..................... .........................10 mm
No-load speed, 1st gear ..................................................................................................0-500 min

-1

 ................... ...................0-500 min

-1

No-load speed, 2nd gear ............................................................................................... 0-2100 min

-1

 ................... ................. 0-2100 min

-1

Impact rate, 1st gear.................................................................................................................. ........................... .................... 7500 min

-1

Impact rate, 2nd gear ................................................................................................................ ........................... ...................31500 min

-1

Max torque...........................................................................................................................110 Nm ..................... .......................110 Nm
Battery voltage.......................................................................................................................18 V ........................ .........................18 V
Drill chuck range ..............................................................................................................1,6-13 mm..................... ...................1,6-13 mm
Weight without battery pack ...............................................................................................1,35 kg ....................... ........................1,4 kg

:HLJKWDFFRUGLQJWR(37$3URFHGXUH$K/LORQ

 ..........................................2,05 kg ....................... ........................2,1 kg

:HLJKWDFFRUGLQJWR(37$3URFHGXUH$K/LORQ

 ..........................................2,05 kg ....................... ........................2,1 kg

:HLJKWDFFRUGLQJWR(37$3URFHGXUH$K/LORQ

 ......................................... 2,35 kg ....................... ........................2,4 kg

Recommended ambient operating temperature ........................................................................................... -18...+50ºC 
Recommended battery type ...........................................................................................................................L18..SHD  
Recommended charger .......................................................................................................................BL18S, AL18G, BL1418 

1RLVH9LEUDWLRQ,QIRUPDWLRQ

Measured values determined according to EN 62841

A-weighted sound pressure level (Uncertainty K=5dB(A)) ..............................................97,0 dB (A) ................ ......................97,0 dB (A)
A-weighted sound power level (Uncertainty K=5dB(A)) ................................................108,0 dB (A) ................ ....................108,0 dB (A)

Wear ear protection!

Total vibration values (vector sum in the three axes) determined according to EN 62841

Impact drilling in concrete ...................................................................................................... ........................... ............ a

h,ID 

= 11,5

PV

2

Uncertainty  ............................................................................................................................ ........................... ................. K = 1,5

PV

2

Drilling into metal......................................................................................................a

h,D 

= 1,7

PV

2

 ................... ...............a

h,D 

= 1,7

PV

2

Uncertainty  ................................................................................................................ K = 1,5

PV

2

 ................... ................. K = 1,5

PV

2

WARNING!

The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with 

a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure.

7KHGHFODUHGYLEUDWLRQDQGQRLVHHPLVVLRQYDOXHVUHSUHVHQWWKHPDLQDSSOLFDWLRQVRIRZHYHULIWKHWRROLVXVHGIRUGLႇHUHQWDSSOLFDWLRQV
XVHGZLWKGLႇHUHQWDFFHVVRULHVRUSRRUO\PDLQWDLQHGWKHYLEUDWLRQDQGQRLVHHPLVVLRQPD\GLႇHU7KHVHFRQGLWLRQVPD\VLJQL¿FDQWO\LQFUHDVHWKH

exposure levels over the total working period.

$QHVWLPDWLRQRIWKHOHYHORIH[SRVXUHWRYLEUDWLRQDQGQRLVHVKRXOGWDNHLQWRDFFRXQWWKHWLPHVZKHQWKHWRROLVWXUQHGRႇRUZKHQLWLVUXQQLQJLGOH
7KHVHFRQGLWLRQVPD\VLJQL¿FDQWO\UHGXFHWKHH[SRVXUHOHYHORYHUWKHWRWDOZRUNLQJSHULRG
,GHQWLI\DGGLWLRQDOVDIHW\PHDVXUHVWRSURWHFWWKHRSHUDWRUIURPWKHHႇHFWVRIYLEUDWLRQDQGQRLVHVXFKDVPDLQWDLQLQJWKHWRRODQGWKHDFFHVVRULHV

keeping the hands warm (in case of vibration), and organising work patterns.