1.
Pull carefully the supports up and out
of the front catch.
2
3
1
2.
Pull the front end of the shelf support
away from the side wall.
3.
Pull the supports out of the rear
catch.
Install the shelf supports in the opposite
sequence.
12.4
Submenu for: Cleaning
The submenu with cleaning functions is
under the sensor field .
Symbol
Menu item
Description
S1
Tank Emptying
Procedure for removing the residual water
from the water drawer after use of the
steam functions.
S2
Steam Cleaning
Cleaning the appliance with steam.
S3
Descaling
Procedure for cleaning the steam genera-
tion circuit from residual limestone.
S4
Rinsing
Procedure for rinsing and cleaning the
steam generation circuit after frequent use
of the steam functions.
12.5
Activating a cleaning
function
1.
Activate the appliance.
2.
Touch until the display showsS1.
In some models you can also choose
S2, S3, S4.
3.
Touch
or
to select a cleaning
function.
4.
Touch
to confirm.
12.6
Tank Emptying - S1
Remove all accessories.
The cleaning function removes the
residual water from the water drawer.
Use the function after the steam cooking
function.
The duration of the function is around 6
minutes.
The light in this function is off.
1.
Put the tray on the first shelf position.
2.
Activate Tank Emptying function - S1.
Refer to "Activating a cleaning
function".
3.
Touch
.
Remove the baking tray after the end of
the procedure.
12.7
Steam Cleaning - S2
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
The steam cleaning functions support
the steam cavity cleaning of the
appliance.
ENGLISH
43
Summary of Contents for BS730470MM
Page 1: ...USER MANUAL BS730470MM EN ...
Page 53: ...ENGLISH 55 ...