1.
Prepare the draining pipe (C),
included in the same package with
the user manual. Put the connector
(B) onto one of the ends of the
draining pipe.
B
C
A
2.
Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
3.
Open the oven door and put the
connector (B) into the outlet valve
(A).
4.
Push the connector again and again
when you empty the water tank.
The tank can have some
water when the display
shows: Water required.
Wait until the water flow
from the water outlet
valve stops.
5.
Remove the connector from the valve
when the water stops flowing.
Do not use the drained
water to fill the water tank
again.
6.10
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.11
Fast Heat Up
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function works.
To turn on the function, hold for 3
seconds. The heat-up indicator
alternates.
6.12
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
www.aeg.com
14
Summary of Contents for BSK772221M
Page 1: ...USER MANUAL EN User Manual Steam oven BSK772221M ...
Page 46: ...www aeg com 46 ...
Page 47: ...ENGLISH 47 ...