2.
Set a heating function or an
automatic programme.
3.
Press again and again until the
display shows: SAVE.
4.
Press
to confirm.
The display shows the first free memory
position.
5.
Press
to confirm.
6.
Enter the name of the programme.
The first letter flashes.
7.
Press
or
to change the letter.
8.
Press
.
The next letter flashes.
9.
Do step 7 again as necessary.
10.
Press and hold
to save.
You can overwrite a memory position.
When the display shows the first free
memory position, press
or
and
press
to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1.
Turn on the oven.
2.
Select the menu: Favourites.
3.
Press
to confirm.
4.
Select your favourite programme
name.
5.
Press
to confirm.
You can press to go directly to menu:
Favourites. You can also use it when the
oven is off.
11.2
Using the Child Lock
When the Child Lock is on, the oven
cannot be turned on accidentally.
If the Pyrolysis function
works, the door locks
automatically.
A message comes on in the
display when you press any
symbol.
1.
Press to turn on the display.
2.
Press and at the same time
until the display shows a message .
To turn off the Child Lock function repeat
step 2.
11.3
Function Lock
This function prevents an accidental
change of the heating function. You can
turn it on only when the oven works.
1.
Turn on the oven.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows: Function Lock.
4.
Press
to confirm.
If the Pyrolysis function
works, the door is locked
and the symbol of a key
comes on in the display.
To turn off the function, press . The
display shows a message. Press again
and then
to confirm.
When you turn off the oven,
the function also turns off.
11.4
Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1.
Turn on the oven.
2.
Set a heating function.
3.
Press again and again until the
display shows: Duration.
4.
Set the time.
5.
Press again and again until the
display shows: Set + Go.
6.
Press
to confirm.
Press any symbol (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
the heating function
works.
• The menu: Basic Settings
lets you turn the function:
Set + Go on and off.
www.aeg.com
26
