4.
After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Do not consider this in the
measurement.
5.
Set the hardness of the water in the
menu: Basic Settings.
Test strip
Hardness of the
water
1
Test strip
Hardness of the
water
2
3
4
The black squares in the table
correspond to red squares on the test
strip.
You can change the hardness level of the
water in the menu: Basic Settings / Water
hardness.
6.
DAILY USE
WARNING!
Refer to Safety chapters.
6.1
Navigating the menus
1.
Activate the appliance.
2.
Press
or
to select the menu
option.
3.
Press
to move to the submenu or
accept the setting.
At each point you can go
back to the main menu with
.
6.2
The menus in overview
Main menu
Sym-
bol
Menu item
Application
Heating Functions
Contains a list of heating functions.
SousVide Cooking
Contains a heating function and a list of automat-
ic programmes.
Recipes
Contains a list of automatic programmes.
Favourites
Contains a list of favourite cooking programmes
created by the user.
Cleaning
Contains a list of cleaning programmes.
Basic Settings
Used to set the appliance configuration.
Specials
Contains a list of additional heating functions.
ENGLISH
11