ENGLISH
55
Press
3
times
=
”
REP ALL
”: The entire CD is repea-
ted continuously.
Press 4 times =
”
RAN
”: All tracks are played back in
random order.
Press 5 times =
All functions are cancelled. Normal
playback is resumed.
CD Keys on the Remote Control
MUTE (1):
Used for switching off the sound
immediately. To cancel this function,
press the MUTE key again.
P/N (2):
Switches between the ”NTSC” and
”PAL” video output system.
TIME (7):
With the TIME key you can enter the
time from which playback is to start.
When this key is pressed, the words
GOTO --:-- appear on the screen.
Please enter the corresponding
fi gures. The fi rst set of fi gures rep-
resents the minutes and the second
set the seconds. The fi gure ”0” is
entered using the ”10” key.
DIGEST (8):
When this key is pressed, the player
subdivides the VCD fi le currently
being played into nine parts of equal
size and displays pictures on the
screen at the same time. This may
take a few minutes, depending on
the size of the fi le. With the 1-9
number keys you can change to
the desired section, which is then
animated. Press the key again to
continue from the selected section in
full picture mode.
OSD (9):
This displays the CD type, the
functions - e.g. SINGLE REMAIN,
the number of the track and the
remaining playing time of the CD.
Press the key up to fi ve times and
select between the various settings.
RETURN (10):
Pressing this key stops CD playback.
The main menu is displayed. This
function can only be used if the CD
that has been inserted is a video 2.0
CD and the PBC mode is activated
(ON) (only in VCD mode).
PBC (11):
Switches PBC on and off (only in
VCD mode).
RESUME (12):
If
the
stop key is pressed, CD
playback is halted. If the RESUME
key is then pressed, playback
resumes from the position where
playback was interrupted (only in
VCD mode).
SLOW (14):
Switches on the slow motion function
during the playback of video CDs.
Each time the SLOW key is pressed,
the speed is changed between 1/2x,
1/4x, 1/8x and
1/16x. To return to normal playback,
press the
/
II
key (only in VCD
mode).
ZOOM (17):
In order to enlarge a picture seg-
ment, press the key ZOOM during
playback. The respective picture
can be displayed using the ZOOM
key in two different sizes. With the
I
I
/
cursor keys
it is possible to locate the picture
segment more accurately. To return
to normal playback, press the ZOOM
key until the word ”RESTORE”
appears (only in VCD mode).
REPEAT (20):
See both tables.
R/L (22):
Switches between the loudspeaker
settings: MONO L, MONO R,
STEREO (only in VCD mode).
Playing CDs
1. Open the CD compartment with the OPEN key.
2. Insert a CD with the label facing upwards on to the
central cone until it clicks into place. Then close the
CD compartment.
3. Press
the
/
II
Play/Pause key (5) on the device
in order to switch it on. The word ”rEAd” appears in
the display. The CD is now played back starting with
the fi rst track. The current song and the time that has
elapsed are shown in the display.
4. In order to remove a CD, press the
STOP key, open
the lid of the CD compartment with the OPEN key and
carefully remove the CD. Always keep the lid of the CD
compartment closed.
Note
: When a disc is inserted incorrectly, ”BAdisc” appears
in the display. If no disc is inserted, the words ”NO DISC”
appear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music
in MP3 format. The device also supports all standard CD
types: CD, CD-RW, CD-R. The active ESP function always
appears in the display (memory 100 seconds); see item
”ESP/NP/DIR”.
05-CDP 4201 NEU4 AEG 55
05.09.2005, 12:07:04 Uhr
