59
Description of the Appliance
The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting one charcoal filter.
You will need an original AEG charcoal filter for this function
(Available from your local AEG Service Force Centre).
Extractor version
In this version fumes are
extracted to the outside via
a hose connected to the
coupling ring.
Fig. 1
.
In order to obtain the best
performance the hose
should have a diameter
equal to the outlet hole.
Should there already be a
pipe of diameter 125 mm
that ducts to the outside
through the walls or roof, it
is possible to use the 150/
125 mm reduction flange
provided (DD 8794 and DD
8795 only). In this case the hood will be slightly noisier.
Filter Version
The air is filtered through a
charcoal filter and returned to
the kitchen.
You will need an original AEG
charcoal filter for the filtering
function. (See Special
Accessories).
Fix the deflector using 2 screws
Ø 3.5x9.5 mm.
Fig. 2
.
coupling ring
reduction
flange
Fig. 1
Deflector
Fig. 2
All manuals and user guides at all-guides.com
