AEG CIB6730ACM, User Manual

The function has no effect

on the operation of the

cooking zones.

5.9 

Pause

This function sets all cooking zones that

operate to the lowest heat setting.
The function does not stop the timer

functions.

Touch   to activate the function.

 comes on. The heat setting is lowered

to 1.
To deactivate the function, touch  . The

previous heat setting comes on.

If you change the heat

setting, the function stops

and the display shows the

new heat setting.

5.10 

Lock

You can lock the sensors on the hob

while cooking zones operate.

Set the heat setting first.

To activate the function:

 touch  . 

comes on for 4 seconds. The Timer stays

on.

To deactivate the function:

 touch  .

The previous heat setting comes on.

When you deactivate the

hob, you also deactivate this

function.

5.11 

Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function:

 the hob must

be deactivated. Touch   for 4 seconds
until   flashes. Touch  .   comes on

for 4 seconds.

To deactivate the function:

 the hob

must be deactivated. Touch   for 4
seconds until   flashes. Touch  . 

comes on for 4 seconds.

To override the function for only one

cooking time:

 activate a cooking zone.

 comes on. Touch   for 4 seconds

until   comes on for all zones. 

Set the

heat setting in 4 seconds.

 You can

operate the hob. When you deactivate

the appliance the function operates

again.

5.12 

OffSound Control

(Deactivation and activation of

the sounds)

Deactivate the hob. Touch   for 3
seconds. Touch   for 3 seconds.   or

 comes on. Touch   of the timer to

choose one of the following:
•

 - the sounds are off

•

 - the sounds are on.

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to   you can

hear the sounds only when:

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

5.13 

Power management

function

• All cooking zones are connected as

on the illustration.

• The hob and both ovens are

connected to one phase.

• The phase has a maximum electricity

load.

• The function divides the power within

the appliance. The oven is more

important than the hob.

• The function activates when the total

electricity load in the appliance is

exceeded.

• The function decreases the power on

the cooking zones to prevent a circuit

overload.

• The heat setting display of the

reduced zones changes between two

levels.

ENGLISH

13