12.2 Catalytic cleaning
CAUTION!
Do not clean the catalytic
surface with oven sprays,
soap or other cleaning
agents. It will damage the
catalytic surface.
CAUTION!
Always turn the oven light on
while using the catalytic
cleaning (if applicable).
WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
Spots or discolouration of
the catalytic surface have no
effect on catalytic properties.
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
The walls with catalytic coating are self-
cleaning. They absorb fat which collects
on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
The oven cavities must be cleaned
separately.
1. Clean the oven floor with warm water
and washing-up liquid, then dry it.
2. Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
3. When the appliance is cool, clean it
with a soft and moist sponge.
12.3 Cleaning the cavity
embossment
The cleaning procedure removes
limestone residue from the cavity
embossment after cooking with steam.
For the function: Steam
Bake we recommend to do
the cleaning procedure at
least every 5 - 10 cooking
cycles.
1. Put 250 ml of white vinegar into the
cavity embossment at the bottom of
the oven.
Use maximum 6% vinegar without
any additives.
2. Let the vinegar dissolve the residual
limestone at the ambient temperature
for 30 minutes.
3. Clean the cavity with warm water and
a soft cloth.
12.4 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the shelf supports in the opposite
sequence.
ENGLISH
33
