13) TUNING UP / DOWN BUTTON
Press this button to search for radio stations. Depends on whether SEEK1 or SEEK 2
mode is selected, different operations can be performed, refer to “SEEK MODE”
paragraph for detail.
15) BAND BUTTON
Press this button to change between band FM.
RESET BUTTON
In case of abnormal operation, use a pencil tip or other non-metallic object to press the
reset button located behind the front panel. Reset button is to be activated for the following
reasons;
- Initial installation of the unit when all wiring is completed.
- All the control function buttons do not operate.
- Abnormal or error symbol shown on the display.
8) LIQUID CRYSTAL DISPLAY PANEL (LCD)
The LCD panel display the frequency, time and activated functions.
NOTE:
It is a characteristic of LCD panel that if subjected to cold temperatures for an extended
period of time, they will take longer time to illuminate than under normal conditions, in
addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out
will return to normal when temperatures increase to a normal range.
10) STATION PRESET BUTTONS (M1-M6)
You can store & recall six preset radio stations by pressing M1-M6 buttons
TO STORE A STATION: 1) select a band (if needed)
2) select a station by tuning up / down button
3) hold a preset button which you want store the station for at least
2 seconds. The preset number will appear on the display
accompanied by a beeps sound.
TO RECALL A STATION: 1) select a band (if needed)
2) press a preset button briefly to recall the stored station.
RESET
RES
ET
AUTO MEMORY STORE: press
AMS
button for more than 1 second to enter auto store mode. The
radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto
store, press
AMS
button again.
PRESET SCAN: press
AMS
button for less than 1 second to scan all preset stations in the
memories of the current band and stay on each memory stations for about 5
seconds. The memory location indicator on the LCD will flash during the
process. To stop preset scan, press AMS button again.
9) AUTO MEMORY STORE / PRESET SCAN BUTTON (AMS)
16) SCAN BUTTON(SCAN)
Press this button, the radio will tune up to search stations, the available stations will blinking
and stay on the display for a few seconds.
- 12 -
