26
Cleaning and Maintenance
• Only use a soft and dry cloth for cleaning.
Batteries
• Batteries may contain toxins. Batteries
must not fall into the hands of children.
Children may place batteries in their mouths
and swallow them. Immediately contact a
physician if batteries were swallowed.
•
Danger of explosion!
Do not mix different
battery types or brands. Do not mix fresh
and exhausted batteries or batteries with
different capacity.
• Do not charge the supplied batteries. Do not
dismantle, short-circuit or burn batteries.
• Remove exhausted batteries from the
remote control to prevent leakage and
resulting damages.
• Always replace both batteries and dispose
of exhausted batteries environmentally
responsible.
• Clean battery and appliance contacts before
inserting the batteries.
• Remove the batteries from the remote
control before longer periods of non-use.
• Do not expose batteries to extreme
conditions, such as placing the remote
control on a radiator; risk of leakage.
• Avoid skin, eye and mucous membrane
contact with leaked battery acid. Wash
thoroughly and contact a physician if you
came into contact.
3. PREPARATION
3.1 SCOPE OF DELIVERY
Check the box content to ensure that all parts
were included:
• TV set with foot
• Mains power cable
• Remote control (incl. 2 batteries type LR03/
AAA .5V)
• User manual and warranty card
3.2 INSERT BATTERIES
You need to insert two batteries type LR03/
AAA, .5V.
. Open the battery compartment at the rear of
the remote control.
2. Insert the supplied batteries.
IMPORTANT!
Observe correct polarity (+/-).
3. Close the battery compartment again.
3.3 INSTALLATION
• Remove the protective foil from the remote
control.
• Place the TV set on a stable, flat and sturdy
surface.
• Do not expose the appliance to extreme heat
or humidity.
• Ensure adequate ventilation on all sides.
If placed in a bookshelf leave minimum
distance of 20cm at top and 0cm on all
sides.
3.4 CONNECT ANTENNA
The TV set is equipped with a built-in tuner to
receive TV signals via aerial/cable connection
and DVB-T signals.
I
MPORTANT!
Connect the antenna before
connecting to mains power.
DVB-T Reception
CAUTION:
The appliance is designed for
passive DVB-T antenna.
• Connect
a
DVB-T antenna to
antenna connector
ANT.
Other Antenna Connections
For optimal, interference-free image quality use
a double shielded 75Ω antenna cable.
1. Connect a 75Ω antenna cable to your aerial.
2. Connect the other end to antenna connector
ANT
. at the rear of the TV set.
3. Select TV in the
SOURCE
menu.
PLEASE NOTE:
To receive programs first
execute channel search (see “Initial Installation”
on page 5).
3.5 MAINS POWER CONNECTION
The TV set is designed for AC 00-240V
~
50/60 Hz.
• Connect the power cord to
AC-INPUT
and a
wall outlet.
CAUTION:
First connect all other devices
before connecting to mains power. The wall
outlet must be freely accessible at all times.
3.6 INITIAL INSTALLATION
A window is displayed after turning the TV set
on; here you select the menu language and
start automatic search.
Summary of Contents for CTV 2201
