English
51
Using the remote control
Loading a CD/DVD
Understanding the
onscreen CD-menu
Track:
”Track” is the designation for sections on an Audio-CD. This may be a
song, the set of a symphony, etc.
Title/Chapter:
Video-DVDs are divided into “Title” and „Chapters“. A „Title“ may be
e.g. a particular film, the „Chapters“ may be subsections of this film.
MPEG4:
Your DVD player is also suitable for playing back files that have been
compressed using the MPEG-4 system (short for Moving Picture Ex-
perts Group-4). MPEG-4 is a compression method by means of which
large quantities of data can be reduced without any noticeable loss
of picture and sound quality.
NOTE:
It is not possible to guarantee full compatibility with all of the com-
pression methods used worldwide, particularly when more than one
soundtrack or subtitles are involved. Also MPEG 4 files with integrated
special functions such as a menu, subtitles etc. are not always sup-
ported. This is
no
malfunction of the player.
Playing media
You transmit commands to the DVD-Player via remote control. It is thus
important to point the end of the remote control towards the DVD-
Player.
NOTE:
•
If the device is not yet in DVD mode, press the
DVB/DVD
button
(Fig. 2/2) on the remote control in order to call up the file selection
menu.
• Select the DVD mode with the
Cursor Buttons
(Fig. 2/9). Confirm
your selection with the
ENTER
button (Fig. 2/22).
1.
Push the CD DOOR OPEN (Fig. 1/20) on the device to the right. The
CD/DVD tray opens.
2.
Place the CD/DVD on the tray.
3.
Close the CD compartment (Fig. 1/21) again. After a short while the
type of the loaded medium is displayed (e.g. „DVD“).
When playing CDs you can view the on-screen menu by pressing the
DISPLAY
-button (Fig. 2/17):
Current track/total number of tracks (1).
Time (2):
This provides information about the duration and the remaining
play time. By standard the play time expired of the current track
is displayed. The display is in hours, minutes and seconds. Press the
DISPLAY
-button (Fig. 2/17) once or several times to have further
times displayed.
The following possibilities are available for selection
• time remaining to the end of the track,
• playback time of the CD so far,
• time remaining to the end of the CD.
CTV4952_DVB_T_DVD_GB.indd 51
05.01.2010 15:17:58 Uhr
