84
For extractor versions (13A), connect the other end of the exhaust
pipe to the flue.
For filter versions (13F), fit deflector F to the support and secure it
to the bracket supplied using 4 screws, then connect the exhaust
pipe to the connection ring located on the deflector.
Fit the nuts with fixing hooks (14) supplied inside the top and bottom
sections of the flues at the rectangular slots. A total of 14 nuts must
be fitted.
Fix the two bracket supplied with one screw each (15a)
Join the two top sections of the flue to cover the support (15b) so
that one of the slots on the sections is situated on the same side of
the control panel and the other on the opposite side. Screw the two
sections together with 8 screws and springs (4 each side- see the
plan diagram for joining the two sections - springs must be fixed
horizontally).
Fix the top flue assembly to the support, near the ceiling, with two
2 nuts (16 - one each side).