AEG Dishwasher, User Manual

USING THE DETERGENT

20

30

M AX

1

2

3

4

+

-

A

B

C

CAUTION!

Use only detergents for dish-
washers.

1.

Press the release button (

B

) to

open the lid (

C

).

2.

Put the detergent in the compart-
ment (

A

) .

3.

If the programme has a prewash
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.

4.

If you use detergent tablets, put
the tablet in the compartment (

A

).

5.

Close the lid. Make sure that the
release button locks into position.

Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.

Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.

SETTING AND STARTING A
PROGRAMME

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come

on.

• The display shows two horizontal sta-

tus bars.

If the control panel shows other condi-
tions, press and hold 

Delay

 and 

Start

at the same time until the appliance is
in setting mode.

Starting a programme without
delay start

1.

Open the water tap.

2.

Press the on/off button to activate
the appliance.

3.

Close the appliance door.

4.

Make sure that the appliance is in
setting mode.

5.

Press 

Program

 again and again un-

til the indicator of the programme
that you want to set comes on.
• The programme duration flashes

in the display.

• The phase indicators of the set

programme come on.

6.

If you want, you can set the options.

7.

Press 

Start

. The programme starts.

• Only the indicator of the phase in

operation stays on.

ENGLISH

15