68
Description of the Appliance
The cooker hood is designed to extract
unpleasant odours from the kitchen, it
will not extract steam.
The hood is supplied as an extractor unit
and can also be used with a recirculation
mode by fitting a charcoal filter.
You will need an original charcoal filter for
this function (Available from your local
Service Force Centre).
Extraction mode
In this mode fumes are extracted to the
outside via a
hose
connected to the
coupling ring
A
.
Fig. 1
.
In order to obtain the best performance the
hose should have a diameter equal to the
outlet hole.
Should there already be a pipe of diameter
125 or 120 mm that ducts to the outside through the walls, it is
possible to use the 150/125-120 mm reduction flange provided. In
this case the hood will be slightly noisier.
Recirculation mode
The air is filtered through a
charcoal filter
and returned to the kitchen.
You will need an original charcoal filter for the
recirculation mode. (See Special
Accessories).
Assemble the deflector (3 parts):
the three
parts
must be fixed with 2 screws Ø 3.5 13
mm, the extension of the deflector is
adjustable and must correspond to the width
of the chimney flue support, to which it must
be fixed.
Fix the deflector using 4 screws Ø 2,9x6.5
mm.
Fig. 2.
Optionally, the position of the chimney
elements can be changed.
When using the hood in the recirculation mode the chimney must be
fixed at the top, with the air outlet grill at the side.
Fig. 1
coupling ring
Fig. 2
=
=
