The LED indicators on the panel switches on
accordingly to selected fan speed level.
The hoods light works independently to
other hood functions. To illuminate the
cooking surface touch the light symbol
. Closing the drawer has no effect on
the hood light.
To turn off the fan continue to press until
the hood fan stops or close the hood drawer.
The hood remembers last setting of fan
speed on closing the drawer. The hood
will operate on this fan speed level when
drawer is pulled out again.
5.2 Delayed switch off function
This function allows to automatically turn off
the fan after specific time of operating.
1. Set the desired fan speed.
2. Press the button.
The indicator on the panel turns on. To turn
off the function press the button again.
The change of the hood fan speed level
or closing the hood drawer when the
function is activated will result in
deactivation of this function.
The time after the function switch off the fan:
Motor Speed level
Time (min)
1
20
2
15
3
10
4
8
5.3 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
LED indicator blinks red regularly for 30
seconds if the grease filter must be cleaned.
The LED indicator blinks red twice per every
second for 30 seconds if the charcoal filter
must be replaced or cleaned.
This function activates independently
after 40 hours of operation for grease
filter and 160 hours of operation for
charcoal filter.
The fan does not operate during the
alarm. Fan starts to operate on last
remembered setting after 30 seconds.
Refer to cleaning the grease filter in care
and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
The function counter for charcoal filter is
disabled by default.
To activate or deactivate the counter for
charcoal filter:
1. Pull out the hood drawer.
2. Make sure that the fan is turned off.
3. Press for 3 seconds.
The function is activated if two white LED
indicators flashes for 3 seconds. The function
is deactivated if only one LED indicator
flashes for 3 seconds.
To reset the function counter in the
notification period:
1. Pull out the hood drawer.
2. Press for 3 seconds.
To reset the function counter out of the
notification period:
1. Pull out the hood drawer.
2. Make sure that the fan is turned off.
3. For grease filter press for 3 seconds.
4. For charcoal filter press for 3 seconds.
The indicator blinks once for correct reset.
62
