English
42
Fig. 2/12
Switching on the player
Fig. 1/1
Optical
Connect an optical cable for transmitting the digital audio signal with
your playback device or amplifi er.
1. Insert the optical plug into the socket on the rear of the device.
2. Insert the optical plug into the corresponding socket of your playback
device or amplifi er.
Turn the DVD player on by pressing the „STANDBY“ button on the front of
the device.
About the DVD-Player
With this DVD-Player you can play a vast variety of DVD-formats
➯
Page 34, „Technical data“.
However, you must be aware that in many cases DVDs are encrypted with
a so-called “Regional Code”. This specifi es for which region in the world
the DVD is intended. As an example, the DVDs marked with regional code
“1” are intended for the USA and Canada. DVDs with regional code “2” are
for use in Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional code “2”.
There are both lots of burning and compressing methods as well as
high quality diff erences in (burned) CDs/DVDs. Moreover, the music
industry has not yet agreed on a fi xed standard for copy protection.
This may, in very isolated cases, result in problems when relaying CDs,
DVDs and MP3 CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of pro-
blems check the settings of the DVD writing program on your computer.
You should in particular make sure that the DVD has been fi nalized. For
further information on this matter please refer to the operating manual
of your recorder.
Input Not Possible
If a function or input selected by you is not possible, the adjacent symbol
is shown on the screen.
05-DVD 4530_GB.indd 42
05-DVD 4530_GB.indd 42
19.02.2008 16:06:13 Uhr
19.02.2008 16:06:13 Uhr
