English
55
Understanding
the menu structure
Using the menu
Overview of the main menu
Changing the default settings
A large number of default settings can be comfortably changed via the
screen menu.
Press the
SETUP
-button (Fig. 3/20) on the remote control to start the
menu for changing the default settings.
쫵
NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The diff erence is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu:
The main level is represented by graphical symbols.
Sub-menu:
The corresponding sub-menu options can be found under each of
the main menu options.
Navigation and selection
Use the
Cursor Buttons
(Fig. 3/21) (
/
) on the remote control to
browse through the main menu.
In contrast to this, you must use the
Cursor Buttons
(
/
) to move
in the sub-menu.
Select a menu option with the
ENTER
-button (Fig. 3/22).
Use the
ENTER
-button also to select an option (e.g. “PAL” in the
illustration on the left). The selected option (in the example „PAL”) is
now highlighted.
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or
the brightness of the screen. The slide control is used as follows:
1.
Select with the
ENTER
-button.
2.
Move the control with the
Cursor Buttons
(
/
).
3.
Confi rm the entry with the
ENTER
-button.
General Setup (1)
Audio Setup Page (2)
Dolby Digital Settings (3)
Preference Page (4)
Password Setup Page (5)
05_DVD4533-GB.indd 55
05_DVD4533-GB.indd 55
08.07.2008 16:38:56 Uhr
08.07.2008 16:38:56 Uhr
