48
English
DVD4555LCD_IM
23.01.17
Screen Saver
The device can display a freeze frame without a time limit. This can cause dam-
age to the screen. Activate the screen saver to protect the screen.
Select between the following options:
■
On:
Screen saver is activated (default).
■
Off:
Screen saver is deactivated.
Auto Standby
With this function you can set the device to switch off automatically after a
specified time.
Select between the following options:
■
Off:
The function is deactivated.
■
3 Hours:
The device turns off after 3 hours.
■
4 Hours:
The device turns off after 4 hours.
Downmix (Downmix)
Modifies the characteristic of the speaker output:
■
L/R:
Select this setting to play the DVD in Pro Logic Dolby Stereo Effect. Plays
a realistic 2-channel stereo effect.
■
Stereo:
Select this setting if you wish to play a DVD recorded in 5.1-audio-
format in 2-channell-stereo sound.
Dolby Digital Setup
Dual Mono
The sound output usually takes place stereo. You may choose a mono output
instead of a stereo output
■
Stereo:
The output is in stereo (default setting).
■
L-Mono:
The output is in mono. On all speakers the signal is emitted from
the “left” stereo channel.
■
R-Mono:
The output is in mono. On all speakers the signal is emitted from
the “right” stereo channel.
■
Mix Mono:
The output is in mono. On all speakers the signal is emitted from
the “both” stereo channel.
Dynamic
This concept “Dynamic Range” describes the ratio from the lowest to the
loudest sound. With a high dynamic range very low, as well as very loud sounds
are emitted.
This may cause playback issues. In the event you view a DVD within a relatively
noisy you may adjust the volume to hear low volume passages, however, it bears
the disadvantage that louder passages are unacceptably loud. Suggestively you
may compromise (reduce) the dynamic range and increase the output volume.
■
FULL – 1/8:
The dynamic ratio is compromised from 1/8 to maximum (FULL).
■
OFF:
The dynamic ratio is not compromised (default setting).
Audio Setup Page
