ENGLISH
42
Presetting stations
A total of 40 radio stations can be preset which can then
be directly tuned into via the number buttons. 20 FM
stations and 20 AM stations:
1. Press FUNCTION button on the remote or on the
front panel until the frequency band appears on the
display.
2. Press the BAND button on the remote to select the
desired band.
3. Use the TUNING button to fi nd your desired station.
4. Press the MEMORY button on the remote control.
5. Use the
I NEXT or PREV I
button to select
the memory number and confi rm your entry with the
MEMORY
button. If this number is already assigned
press the
MEMORY
button twice.
6. Repeat steps 2 – 5 until all radio stations have been
set.
Tuning into a preset station
1. Press
the
FUNCTION button to select the radio
operation.
2. Press
the
BAND button on the remote to select the
desired band.
• Press
the
PLAY button and
I NEXT or PREV
I
button to select the presetted station or use the
numbered buttons to enter the number to select the
presetted station.
Notes:
When assigning a number beyond 10 fi rst press the +10
button and then the respective number. Example: For
memory number 15 fi rst press +10 and then 5.
Radio Data System (RDS)
Today many stations transmit so-called RDS (Radio
Data System) codes that contain a variety of additional
information along with regular sound signals through FM
broadcasting. If the stereo is currently receiving an RDS
station, it displays the station name.
Example:
Programme Types (PTY)
1. Tune in a station either manually or by selecting a
pre-set station as described on the various page.
2. Press the DISPLAY button repeatedly until “PTY” is
displayed. Shortly afterwards the current program
type will be displayed briefl y.
Example:
Radio text
Some RDS stations transmit information known as Ra-
diotext. Radiotext provides additional information about
the station and its programmes. Radiotext appears as
ticker text, scrolling sideways in the display. As this infor-
mation is transmitted character by character, it may take
some time before the text is received in full.
1. Tune in a station either manually or by selecting a
pre-set station as described on the previous page.
2. To call up Radiotext keep pressing the DISPLAY
button on the remote control, until “RT” displayed.
3. Deactivate Radiotext by pressing the DISPLAY
button.
If Radiotext is not provided by the selected station, only
the station frequency will be shown in the display.
It takes about 2 minutes to receive all Radiotext charac-
ter.
Example:
5....-05-DVD 4603 HC AEG_GB 42
16.04.2004, 9:22:40 Uhr
