50
Themen
NOTE:
Do not insert the plug of the DVD player into the socket until all loudspeakers
and connections have been correctly made!
1.
Remove approximately 1,5 cm of the cable insulation.
2.
Turn over the cable end.
3.
Open the cable clamp by pressing the lug.
4.
Now connect the loudspeaker cable supplied to the loudspeaker. Ensure
the correct polarity (connect black to black and red to red).
5.
Now connect the other end of the cable accordingly to the SPEAKERS
OUT of the DVD player. Please proceed as described under steps 1-4.
NOTE:
Please ensure that exposed wires do not touch or cross each other.
Danger of short-circuiting!
The correct confi guration and arrangement of a surround sound system is
decisive for the sound that is produced. In order to achieve the best possible
sound, the instructions concerning the arrangement of the loudspeakers
should be followed before they are connected.
Front/Main Loudspeakers (Right and Left, Centre Loudspeakers)
These three loudspeakers produce excellent sound characteristics and incre-
ase the dynamic effect of audio playback. The main dialogue of a fi lm is heard
through these loudspeakers.
Rear or Surround Loudspeakers
These two loudspeakers offer dynamic 3-D sound effects and create spatial
sound playback as they add background noises to the main speakers.
Subwoofer Loudspeaker
The subwoofer is a powerful bass loudspeaker which gives the sound even
more realistic characteristics.
NOTE:
In order to achieve an optimum 3-D sound effect, the output from the
centre and subwoofer loudspeaker is is also heard through the front and
rear loudspeakers.
The surround and centre loudspeakers only work when the system is
turned to surround sound.
The ideal confi guration of the surroundsound system depends on the size of
the room and the wall materials. The illustration below shows a typical arrange-
ment of the various loudspeakers.
Setting up the Loudspeakers
Arranging the Loudspeakers
Setting up and connecting
05-DVD 4611 AEG - GB 50
25.01.2007, 8:47:35 Uhr